This ID card is perfect for anyone who wants to believe. Inspired by the iconic 1990s cult television series The X-Files, this Special Agent Fox Mulder ID badge is an ideal accessory for fans, collectors, and budding cosplayers alike.

Each card has been meticulously crafted to replicate the appearance of the original on-screen prop. The design features a genuine photograph that has been laminated onto the card, along with a hand-signed ballpoint signature for an authentic, lived-in look. Attention has been paid to every detail to capture the distinctive style seen throughout the series.

The ID card comes complete with a clear protective plastic sleeve and a clothing clip, making it ready to wear straight out of the packet. Whether displayed as part of a collection, used for cosplay events, or simply carried by those who refuse to stop searching for the truth, this badge is a must-have piece of X-Files memorabilia.

The individual sheets are 100×65mm / 10.0×6.5cm / 3.9×2.5inches

This set of Apology Cue Cards is inspired by those used by the Twelfth Doctor in Under the Lake. Each card has been carefully recreated with close attention to the typography, layout, and handwritten lettering of the original props. Every card has been individually written to faithfully reproduce the distinctive style, spacing, and proportions seen on screen.

The cards are produced on premium 230gsm matte photo paper, providing a durable finish and excellent print quality while maintaining an authentic prop-like appearance.

The set includes the five cards visible in Under the Lake, alongside additional cards referenced in Face the Raven and the short story Baby Sleepy Face, bringing the collection to seven cards in total.

Within the set are the following cards:

1. I didn’t mean to imply that I don’t care. (Under the Lake)

2. I’m very sorry for you loss. I’ll do all i can to solve the death of your friend/family member/pet. (Under the Lake)

3. I completely understand why it was difficult not to get captured. (Under the Lake)

4. No-one is going to get eaten/vapurised/exterminated/upgraded/possessed/mortally wounded/turned to jelly. We’ll all get out of this unharmed. (Under the Lake)

5. It was my fault, I should have known you didn’t live in Aberdeen. (Under the Lake)

6. I could be wrong, lets try it your way. (Face the Raven)

7. Good Work! You tried our hardest to stop an alien plot, invasion or mystery. Delete as appropriate. But this time you were unsuccessful. (Baby Sleepy Face)

The individual sheets are 150×105mm / 15.0×10.5cm / 5.9×4.1inches

The Fire Brigade Helmet with Crossed Axes Silver Button, original vintages items and screen accurate to the one from Remembrance of the Daleks.

Created originally by the Birmingham Buttons Limited, these original vintage buttons will show clear signs of wear and tear and may even have a tarnished patina. This is common with these types of buttons. There are two back designs which are shown in the last photo, but the front design all match.

The button is 25×25mm / 2.5×2.5cm / 0.9×0.9inches

The B.C. Rich Brown Double Neck Guitar pin, recreated from the version seen across Dragonfire and Remembrance of the Daleks.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a rubber pin back.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 39×17.5mm / 3.9×1.7cm / 1.5×1.6inches

The Pirate Head pin, recreated from the version seen across Dragonfire, Remembrance of the Daleks, The Happiness Patrol, Silver Nemesis, The Greatest Show in the Galaxy, Battlefield and The Curse of Fenric.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a rubber pin back.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 21.7×26mm / 2.1×2.6cm / 0.8×1.0inches

The Blue Shield Blue Peter pin, recreated from the version seen in every jacket variant.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a safety‑pin style back, chosen specifically to prevent rotation when worn.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 26×28mm / 2.6×2.8cm / 1.0×1.1inches

The White Shield Blue Peter pin, recreated from the version seen in every jacket variant.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a safety‑pin style back, chosen specifically to prevent rotation when worn.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 26×28mm / 2.6×2.8cm / 1.0×1.1inches

The “England” Union Jack Shield pin, recreated from the version seen across every jacket variant.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a rubber pin back.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 19.6×22mm / 1.9×2.2cm / 0.7×0.8inches

The American “Football” pin, recreated from the version seen in Remembrance of the Daleks, The Happiness Patrol, Silver Nemesis, The Greatest Show in the Galazy, Battlefield and the Curse of Fenric.

This wooden pin design is inspired by the iconic jacket worn by Ace during the 1980s era of Doctor Who. Her jacket is famously covered in distinctive badges, pins, and patches, many of which are notoriously difficult for cosplayers and collectors to source. Each piece is handmade with care, combining natural materials with a durable resin finish for a clean, modern look.

Each pin is made from laser‑cut 3mm birch plywood, topped with printed gloss vinyl, and coated in UV‑cured resin for clarity and protection. The back and sides are sealed with a matte clear finish to preserve the wood. The pin is secured with a rubber pin back.

Because these pins are completely handmade, small micro‑bubbles may appear in the resin. These are only noticeable when viewed closely and are considered normal for handcrafted pieces. Pins with more visible surface imperfections are still available within the Clearance section and offered at a discounted rate.

This wooden pin is based on visuals taken from the various episodes, 28.5×24mm / 2.8×2.4cm / 1.1×0.9inches

A playful, typographic bookmark that leans fully into its own identity. Printed on high‑quality 230gsm paper and finished with a gloss‑laminated vinyl layer, it has a smooth, durable surface that keeps colours vibrant and resists everyday wear.

The design is single‑sided, featuring a custom typeface and laminated on both sides for durability, it’s designed to withstand everyday use and can be easily wiped clean.

Each bookmark measures 50mm x 165mm, making it an ideal fit for most books.

Ideal for gifting, collecting, or adding a pop of charm to your current read.

A bold, tongue‑in‑cheek bookmark for readers who prefer their quiet time uninterrupted. Each piece is printed on high‑quality 230gsm paper and finished with a gloss‑laminated vinyl layer, giving it a smooth, durable surface that resists wear while keeping colours bright and crisp.

The design is single‑sided, featuring a custom typeface and laminated on both sides for durability, it’s designed to withstand everyday use and can be easily wiped clean.

Each bookmark measures 50mm x 165mm, making it an ideal fit for most books.

Ideal for gifting, collecting, or adding a pop of charm to your current read.

A bright, characterful bookmark designed for readers who like their accessories as bold as their stories and loves books! Each piece is printed on high‑quality 230gsm paper and finished with a gloss‑laminated vinyl layer for durability, smooth handling, and a clean, collectible feel.

The design is single‑sided, featuring a custom typeface and laminated on both sides for durability, it’s designed to withstand everyday use and can be easily wiped clean.

Each bookmark measures 50mm x 165mm, making it an ideal fit for most books.

Ideal for gifting, collecting, or adding a pop of charm to your current read.